LG NP8340 Owners Manual - English - Page 51

Standby mode, Network standby mode, Reset the Speaker, Resetting the Music Flow R1

Page 51 highlights

Operating 51 Standby mode Reset the Speaker The speaker switches to the standby mode if there is no music playback or no button operation. If the speaker is not turned on or doesn't respond, reset the speaker. Standby mode Resetting the speaker Option 1. yy Touch and hold the button until you hear the beep sound once. Then all wireless network If network is disconnected and there is no music ports are deactivated and the stored wireless playback and no button operation for 20 minutes, network information is deleted. the speaker switches to the standby mode. Then yy Touch and hold the button until you hear the Network status LED turns red. beep sound twice. You can reset the speaker to its original factory settings. Option 2. 3 If you touch and hold the 1/!/F button for 5 Resetting the Music Flow R1 seconds, the speaker switches to the standby Press and hold the ADD button for 8 seconds to mode. Then Network status LED turns red. delete the stored network information. Operating Network standby mode When network is connected but music is not played and buttons are not pressed for 20 minutes, the speaker switches to the network standby mode. Then white Network status LED dimmed. ,,Note On the Network Standby Mode, if you touch 1/!/F button, the latest music playlist will be played. ,,Note After resetting the Music Flow R1, you must unplug and plug in your speaker for a proper connection with the Music Flow R1.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63

Operating
51
Operating
3
Standby mode
The speaker switches to the standby mode if there
is no music playback or no button operation.
Standby mode
Option 1.
If network is disconnected and there is no music
playback and no button operation for 20 minutes,
the speaker switches to the standby mode. Then
Network status LED turns red.
Option 2.
If you touch and hold the
1
/
!/
F
button for 5
seconds, the speaker switches to the standby
mode. Then
Network status LED turns red.
Network standby mode
When network is connected but music is not
played and buttons are not pressed for 20 minutes,
the speaker switches to the network standby mode.
Then white
Network status LED dimmed.
On the Network Standby Mode, if you touch
1
/
!/
F
button, the latest music playlist will be
played.
,
Note
Reset the Speaker
If the speaker is not turned on or doesn’t respond,
reset the speaker.
Resetting the speaker
y
Touch and hold the
button
until you hear
the beep sound once. Then all wireless network
ports are deactivated and the stored wireless
network information is deleted.
y
Touch and hold the
button until you hear the
beep sound twice. You can reset the speaker to
its original factory settings.
Resetting the Music Flow R1
Press and hold the
ADD
button for 8 seconds to
delete the stored network information.
After resetting the Music Flow R1, you must
unplug and plug in your speaker for a proper
connection with the Music Flow R1.
,
Note