LG OLED65GXPUA Owners Manual - Page 11

ENGLISH_index (For installation on wood stud) Use the Ø 4 mm drill bit for wood to drill holes with the depth of 76 mm (2.9 Inches). (Clean the drilled hole.) Drywall Connections You can connect various external devices to the TV. For more information on external device's connection, refer to the manual provided with each device. 76 mm / (2.9 Inches) Wood stud Antenna/Cable Connect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations may differ from the actual items and an RF cable is optional. •• Make sure not to bend the copper wire of the RF cable. Without using the wall mounting anchor, fasten the wall mounting screw directly to the wood stud. Copper wire After Installation • When connecting additional cables from the sides, we recommend holding the centre of the TV horizontally or vertically and pulling the product to make sure there is sufficient distance from the wall before connecting. • When connecting additional cables from the bottom, we recommend releasing the TV from the wall mount before connecting. • Use cable management systems to arrange the cables at the bottom of the TV as shown below. Cable managements are not provided with the product, so purchase them separately. (For example) •• Complete all connections between devices, and then connect the power cord to the power outlet to prevent damage to your TV. •• Use a signal splitter to use 2 TVs or more. •• DTV Audio Supported Codec: MPEG, Dolby Digital •• This TV cannot receive Ultra HD (3840 x 2160 pixels) broadcasts directly because the related standards have not been confirmed. Other connections Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable. • After installing the product, be sure to use it adhered to the wall. -- Using the product while it is not adhered to the wall may damage or shake the product. 11