LG P659 Quick Start Guide - English - Page 12
Connect the USB Adapter and USB cable as shown on, the previous Plug the USB cable as shown - chargers
View all LG P659 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Warning! If the touch screen does not function while the phone is in the process of charging, it may be due to an unstable power supply. As a result, disconnect the USB cable from the device or unplug the USB Adapter from the power outlet. 1 Connect the USB Adapter and USB cable (as shown on the previous page). 2 Plug the USB cable (as shown on the next image) into the phone's Charger/Accessory Port. NOTE The battery must be fully charged initially to improve battery lifetime. NOTE Your phone has an internal antenna (as shown on the next page). Be careful not to scratch or damage this rear area, as that will cause loss of performance. When charging your phone with a fully discharged battery, the keypad LED will briefly flash indicating charging is occurring in a mode designed to prevent battery damage. The blinking will stop and normal charging will commence once a sufficient minimum charge has been established. 10