LG RVF1000 Owners Manual - Page 19
Connecting Power, System connection check, Now, you can use the system. Do the next configuration.
View all LG RVF1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Connecting Power Connect the power cable as shown in the following illustrations. Power connection HDMI OUT CAMERA RGB(PC) IN LAN DC IN POWER Installation 19 3 Installation CAUTION You must use supported Adaptor. If you connect other adaptor which is not offered by RVF1000 device, you may make malfunction, failure and fire. System connection check After all of the connections are completed, follow below steps to check the system operation. 1. Turn on the monitor. 2. Press the power button on the rear of the codec unit. System booting will commence. When the booting is completed the initial configuration menu will be displayed. If it is not displayed, check the device connections and make sure the connections are correctly set. Now, you can use the system. Do the next configuration. NOTE Video out of RVF1000 default setting is 720p. If the monitor (TV) does not support the 720p, press the blue llll button 5 time. And then RVF1000 is rebooted automatically as 480p.