LG SWWE50N3 Owners Manual - Page 55
Troubleshooting
View all LG SWWE50N3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
en-us_main.book.book Page 54 Monday, February 20, 2023 2:02 PM 54 TROUBLESHOOTING TROUBLESHOOTING The appliance is equipped with an automatic error-monitoring system to detect and diagnose problems at an early stage. If the appliance does not function properly or does not function at all, check the following before you call for service. Washer FAQs: Frequently Asked Questions Q: Why does my washer make loud banging noises while it is filling with water? A: This is actually a problem with the plumbing in your home. When the water valve in the washer shuts off, it can cause pipes in your home to move, resulting in a loud banging noise. This effect, called water hammer, can be reduced by installing an item called a water hammer arrestor. Add-on arrestors can be purchased through your local hardware or home improvement store. Q: Why is there so little water in my washer? How can it clean the clothes? A: HE (High-Efficiency) washers are designed to properly wash your laundry while using a minimum amount of water and energy. Because the water volume is low, the small amount of detergent used is more concentrated in the water, resulting in excellent cleaning performance. Q: When I press a button, why does my washer beep and then nothing happens? A: The Control Lock feature is turned on. To turn it off, turn on the product, then press and hold the lock icon on the display for 3 seconds. Q: Where should I pour the powdered laundry products when doing my laundry? A: If you are using powdered laundry detergent, load it in the main detergent dispenser section of the manual dispenser after removing the liquid detergent insert. Powdered laundry agents or powdered color safe bleach should be put directly into the drum. These products can be put in the empty drum before loading or on top of the laundry after loading the washer. Error Messages Problem Door open Door unlocked Water supply Possible Cause & Solution The door is opened. • Open and close the door again. If the message keeps appearing, unplug the power cord and call for service. The door is not secured. • Check for objects around the door and door seal. If the message keeps appearing, unplug the power cord and call for service. Water supply faucets are not fully open. • Make sure that the water faucets are fully open. Water inlet hoses are kinked, pinched, or crushed. • Make sure that the hoses are not kinked, pinched or crushed behind or under the washer. Be careful when moving the washer during cleaning or maintenance. Water inlet filters are clogged. • Clean the inlet filters. See MAINTENANCE.