LG TS-L1210HL Owners Manual - Page 8

p- .o .>, Auto Operation ] Press the Starl/Stop button. The unit will respond with a beep. 2 Open the door on'the remote control. To select Auto Operation, press the Operation Mode Selection button. Each time the button is pressed, the operation mode is shifted in the direction of the arrow. Cooling Auto Heallhy Heating DehumidificaC_loenaptropmodetody) 3 The temperature and fan speed are automatically set by the electronic controls based on the actual room temperature. If you want to change the set temperature, close the door on the remote control and press the Room Temperature Setting buttons. The cooler or warmeryou feel, the more times (up to two times) you should press the button. The set temperature will then be changed automatically. Se the temperature er thetemperature "_ "_ [During Auto Operation: rJ You cannot switch the indoorfan speed. It has already been set by the Fuzzy rule. !.JIf the system is not operating as desired, manually switch to another mode. The system will not automatically switch from the cooling mode to the heating mode, or from heating to cooling, it must be done by manually resetting. "_ LI During Auto Operation, pressing the chaos swing button makes the horizontal louvers swing up and I_ down automatically. If you want to stop auto-swing, press the chaos swing button again. 8;