LG WM1355HR Owner's Manual - Page 26
Maintenance
UPC - 048231010382
View all LG WM1355HR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
CARE AND CLEANING mAINTENANCE Cleaning the water Inlet Filters If the washer detects that water is not entering the dispenser, an error message will show on the display. If you live in an area with hard water, this may be caused by clogged inlet filters. IMPORTANT: Use extreme care when removing and cleaning the filters. If the filters cannot be cleaned or are damaged, do NOT operate the washer without the inlet filters. Contact LG Customer Service or a qualified LG servicer. IMPORTANTE: Use ONLY the inlet hoses provided by LG with this laundry product. Aftermarket hoses are not guaranteed to fit or function correctly. Other hoses may not tighten correctly and could cause leaks. Subsequent damage to product or property will not be covered under the terms of LG's warranty. 1 Turn off both water taps completely. Unscrew the hot and cold water lines from the back of the washer. NOTE: The inlet filters protect the solenoids from grit and debris. If the filters are not in place, the valves will be damaged. Inlet Filter 2 Carefully remove the filters from the water inlets, and soak them in white vinegar or a lime scale remover, following the manufacturer's instructions. Rinse thoroughly before reinstalling. Press the filters back into place and reattach the water lines. Do NOT operate the washer without the inlet filters. 26