LG WM2350HSC Owner's Manual - Page 13
Connecting The Drain Line
View all LG WM2350HSC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
ENGLISH INSTALLATION INSTRUCTIONS CONNECTING THE DRAIN LINE • The drain hose should always be properly secured. Failure to properly secure the drain hose can result in flooding and property damage. • Do not install the end of the drain hose higher than 96 inches (244.8 cm) above the bottom of the washer. • The drain must be installed in accordance with any applicable local codes and regulations. • Make sure that the water lines are not stretched, pinched, crushed, or kinked. NOTE: If the drain hose is extended more than 4 inches beyond the end of the elbow bracket, mold, or microorganisms could spread to the inside of the washer. No more than 4 inches Elbow Bracket Option 2: Laundry Tub Elbow Bracket Laundry Tub Tie Strap Stand Pipe Drain Hose Tie Strap Clip the end of the hose into the elbow bracket. Hang the end of the drain hose over the side of the laundry tub. Use tie strap to secure the drain hose in place. NOTE: Total height of the hose end should not exceed 96 inches (244.8 cm) from the bottom of the washer. Option 1: Standpipe Elbow Bracket Drain Hose Option 3: Floor Drain Drain Hose Floor Drain Clip the end of the hose into the elbow bracket. Insert the end of the drain hose into a standpipe. Use tie strap to secure the drain hose in place. NOTE: Total height of the hose end should not exceed 96 inches (244.8 cm) from the bottom of the washer. Insert the end of the drain hose into the floor drain. Secure the hose in place to prevent it from moving. MFL62526846_en_101116.indd 13 13 2010.11.16 10:59:9 AM