LG WM2688HNM Owners Manual - Page 21
Manual of RLM & PLC - owners manual
View all LG WM2688HNM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Water in the washer does not drain or drains slowly • Drain hose is bent or clogged. • The drain filter is clogged. Clean and straighten the drain hose. Clean the drain filter. Washer does not start • Electrical power cord may not be plugged in or connection may be loose. • House fuse is blown, circuit breaker tripped, or a power outage has occurred. Make sure plug fits tightly in wall outlet. Reset circuit breaker or replace fuse. Do not increase fuse capacity. If problem is a circuit overload, have it corrected by a qualified electrician. Washer won't spin • Water supply tap is not turned on. • Check that the door is firmly shut. Turn on water supply tap. Close the door and press the Start/Pause button. After pressing the Start/Pause button, it may take a few moments before the clothes washer begins to spin. The door must lock before spin can be achieved. Wash cycle time delayed RLM problem Washer odor ° The washing time may vary by the amount of laundry, water pressure, water temperature, and other using conditions. If the imbalance is detected or if the suds removing program operates, the wash time shall be increased. See the Owner's Manual of RLM & PLC modem. • Do not use HE detergent. • Stain under the door seal. Use only HE detergent. Wipe off the stains. The door cannot be unlocked by pressing the Start/Pause button to stop the washer. • The water temperature or the level is high Drain the water by using Drain/Spin cycle. (The door may be opened after the Drain/ Spin cycle is complete.) ",.':N- ormal sounds that may be heard: - Clicking: When the door is locked or unlocked. - Spraying: When the steam is sprayed and/or the water is circulated. - Gurgling or humming: When the water is drained from the washer. (This happens during the end of draining.) - Splashing: When the drum is tumbling, during the wash and rinse cycle. 21