LG WM2688HNMA Owner's Manual (English) - Page 12
Cycle Setting Buttons, Steam Cycles
UPC - 048231009508
View all LG WM2688HNMA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
HOW TO USE STEAM CYCLES STEAM cycles include the AllergieneTM Sanitary, Bulky/Large, Cotton/Normal, and Perm Press cycles. Adding the Steam option to these cycles provides superior cleaning performance while reducing energy and water consumption. By using a hot steam spray from above and cooler water below, fabrics get the cleaning benefits of a super hot wash, without the energy usage or potential damage to fabrics. To Add STEAM to a Standard Cycle: 1 Turn on the washer and turn the cycle selector knob to select a cycle with the STEAM option. 2 Press the STEAM button. The washer will automatically adjust the cycle settings. 3 Set any other desired options. 4 Press the START/PAUSE button to start the cycle. The washer will start automatically. CAUTION: Do not touch the door during steam cycles. The door surface can become very hot. Allow the door lock to release before opening the door. Do not attempt to override the door lock mechanism or reach into the washer during a steam cycle. Steam can cause severe burns. IMPORTANT NOTES ABOUT STEAM CYCLES: • Steam may not be clearly visible during the steam cycles. This is normal. Too much steam could damage clothing. • Do not use steam with delicate fabrics such as wool, silk, or easily discolored fabrics. • Do not touch the door. Using the SteamFresh™ Cycle SteamFresh uses the power of steam alone to quickly reduce wrinkles and odor in fabrics. It brings new life to wrinkled clothes that have been stored for an extended time and makes heavily wrinkled clothes easier to iron. SteamFresh can also be used to help reduce odors in fabrics. To Use the SteamFresh Cycle: 1 Turn on the washer and turn the cycle selector knob to select the SteamFresh cycle. 2 Load up to 5 items and close the door. NOTE: If there is any moisture inside the drum, such as from a previous wash cycle, wipe the drum dry with a towel before adding clothes. 3 Press the STEAM button until the correct number of items is shown in the display. No other options need to be set. 4 Press the START/PAUSE button to start the cycle. After the SteamFresh cycle is complete, the washer will tumble the clothes for up to 30 minutes to prevent rewrinkling. After removing clothes from the SteamFresh cycle, they may feel slightly damp. Place clothes on a hanger for at least 10 minutes to allow them to dry. • The SteamFresh cycle is not recommended for use with 100% cotton clothing. • Remove stains from clothing before using the SteamFresh cycle; the high heat could cause stains to set permanently. • Do not use SteamFresh with the following items: wool, blankets, leather jackets, silk, wet clothes, lingerie, foam products, or electric blankets. • Best results are achieved when articles are of similar size and fabric type. Do not overload. 22 HOW TO USE CYCLE SETTING BUTTONS Each cycle has preset settings that are selected automatically. You may also customize the settings using the cycle setting buttons. Press the button for that option to view and select other settings. The washer automatically adjusts the water level for the type and size of wash load for best results and maximum efficiency. It may seem there is no water inside the drum in some cycles, but this is normal. NOTE: To protect your garments, not every wash/ rinse temperature, spin speed, soil level, or option is available with every cycle. See the Cycle Guide for details. WASH/RINSE Selects the wash and rinse temperature combination for the selected cycle. Press the WASH/RINSE button repeatedly to scroll through available settings. • Your washer features a heating element to boost the hot water temperature for Extra Hot settings. This provides improved wash performance at normal water heater settings. • Select the water temperature suitable for the type of load you are washing. Follow the fabric care label for best results. • Warm rinses leave the loads drier than cold rinses. Warm rinses can increase wrinkling. • In cold climates, a warm rinse makes the load more comfortable to handle. • Cold rinses use less energy. SOIL LEVEL Adjusts the selected cycle to allow more time for heavily soiled clothes or less time for lightly soiled clothes. BEEPER Adjusts the volume of the end-of-cycle beeper, or turns it off. SPIN SPEED The washer drum spins at up to 1,320 RPM. This reduces drying time and saves energy. Press the SPIN SPEED button to select the maximum spin speed. Some fabrics, such as delicates, require a slower spin speed. The Drain & Spin cycle: The Spin Speed button also activates the Drain & Spin cycle to drain the tub and spin clothes; for example, if you want to remove clothes before the cycle has ended. To activate the DRAIN & SPIN cycle: 1 Press the ON/OFF button to turn on the washer. 2 Press the SPIN SPEED button. 3 Select the desired spin speed. NOTE: If NO SPIN is selected, the washer will drain only. 4 Press the START/PAUSE button. 23