LG WM2688HNMA Owner's Manual (English) - Page 17

TROUBLESHOOTING BEFORE CALLING FOR SERVICE (cont.) Problem Wrinkling Drum light does not stay on Remote Laundry Monitor (optional accessory) not working properly The display shows: The display shows: Possible Causes • Washer not unloaded promptly. • Washer overloaded. • Hot and cold water inlet hoses are reversed. • This is normal. • Refer to the instruction manual for the Remote Laundry Monitor. Solutions • Always remove items from the washer as soon as the cycle is completed. • The washer can be fully loaded, but the drum should not be tightly packed with items. The door of the washer should close easily. • Hot water rinse can set wrinkles in garments. Check the inlet hose connections. • The drum light shuts off automatically when the washer starts. Press and hold the RINSE+SPIN button for 3 seconds to turn on the light; it will turn off automatically after 4 minutes. • Refer to the instruction manual for the Remote Laundry Monitor. • Load is too small. • Load is out of balance. • The washer has an imbalance detection and correction system. If individual heavy articles are loaded (bath mat, bath robe, etc.) and the imbalance is too great, the washer will make several attempts to restart the spin cycle. If an imbalance is still detected, the washer will stop and the error code will be displayed. • Control error. • Add 1 or 2 similar items to help balance the load. • Rearrange items to help balance the load. • Unplug the washer and call for service. The display shows: • Water level is too high due to a faulty water valve. • Close the water taps, unplug the washer, and call for service. The display shows: • The water level sensor is not working correctly. • Close the water taps, unplug the washer, and call for service. The display shows: The display shows: • Thermal overload protection circuit in the motor has been tripped. • A power failure has occurred. • Allow the washer to stand for 30 minutes to allow the motor to cool; then restart the cycle. If the LE error code still appears, unplug the washer and call for service. • Restart the cycle. 32 SPECIFICATIONS/OPTIONAL ACCESSORIES KEY DIMENSIONS AND SPECIFICATIONS The appearance and specifications listed in this guide may vary due to constant product improvements. Steam Washer™ Model WM2688H*MA Description Front-Loading Washer Electrical Requirements 120 VAC @ 60 Hz. Max. Water Pressure 14.5~116 PSI (100~800 kPa) Dimensions 27"(W) X 293/4"(D) X 3811/16"(H), 51"(D with door open) 68.6 cm (W) X 75.6 cm (D) X 98.3 cm (H), 129.5 cm (D with door open) Net Weight Max. Spin Speed 192 lb. (87 kg) 1,320 RPM OPTIONAL ACCESSORIES For these and other LG products, contact your local LG dealer, or visit our Web site at ca.lge.com. Pedestal Give your LG washer and dryer a boost with matching 14-inch high pedestals. They feature a storage drawer for added convenience. 14" Pedestal Color WDP3W WDP3B WDP3S WDP3N WDP3R White Black Titanium Navy Blue Wild Cherry Red Stacking Kit If space is at a premium, use this kit to securely stack your LG front-load washer and dryer. Bracket Kit Color WSTK1 BSTK1 SSTK1 NSTK1 RSTK1 White Black Titanium Navy Blue Wild Cherry Red Remote Laundry Monitor Check the status of a load of laundry from anywhere in the house without special wiring. This unit plugs into any standard household outlet and toggles between washer and dryer status. 33