LG Z50P3 Operation Guide - Page 26

MFL34797058-en-simple 11/6/07 4:52 PM Page 26 APPENDIX TROUBLESHOOTING i Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV. i Ensure that the batteries are installed with correct polarity (+ to % - to -). i Ensure that the correct remote operating mode is set: TV, VCR etc. i Install new batteries. > *=_ *=_ i=m z x I Check whether the product is turned on. i Try another channel. The problem may be with the broadcast. i Is the power cord inserted into wall power outlet? Check your antenna direction and/or location. i Test the wall power outlet, plug another product's power cord into the outlet where the product's power cord was plugged in. I This is normal, the image is muted during the product startup process. Please contact your service center, if the picture has not appeared after five minutes. i Adjust Color in menu option. i Keep a sufficient distance between the product and the VCR. i Try another channel. The problem may be with the broadcast. i Are the video cables installed properly? i Activate any function to restore the brightness of the picture. i Check for local interference such as an electrical appliance or power tool. I Station or cable product experiencing problems, tune to another station. i Station signal is weak, reorient antenna to receive weaker station. i Check for sources of possible interference. i Check antenna (Change the direction of the antenna). 26 '