LG ZHX-313 Operation Guide - Page 42

Troubleshooting (Continued) Symptom Some channels are skipped over when using CH/TRK (v/V) Picture and sound of broadcasting channel are weak or missing. Cause Those channels were deleted with the CH. ADD/DEL option. Antenna or cables are loose. Wrong TUNING BAND option is being used. Camcorder image via A/V input to DVD+Hi-Fi VCR is not shown on TV screen. Timer recording is not possible. indicator appears after DVD+Hi-Fi VCR is turned off. Stereo Audio Record and/or Playback is not present. DVD+Hi-Fi VCR SOURCE SELECT is not set to LINE1 or LINE2. Clock in DVD+Hi-Fi VCR is not set to correct time. Timer has been programmed incorrectly. indicator does not appear after programming timer. DVD+Hi-Fi VCR is in Timer Recording mode. TV is not Stereo-compatible. Broadcast program is not in stereo format. DVD+Hi-Fi VCR BROADCAST TYPE mode is set to SAP or MONO. Correction Use CH. ADD/DEL. to restore channels. See "Channel Selection" on page 17. Tighten connections or replace cable. Try all TUNING BAND options. See "Channel Selection" on page 17 for details. Use INPUT to select LINE input source (LINE1 or LINE2). Set clock to correct time. See "Setting the Clock" on page 18. Reprogram Timer. See "Timer Recording" on pages 25 and 26. Reprogram Timer. This is the normal indication that the DVD+Hi-Fi VCR is in TIMER mode. No action is possible. No action is possible. Set BROADCAST TYPE mode to STEREO. See "Setting the VCR Setup Menu" on page 17. Moisture Condensation Moisture condensation can occur: In locations where moisture condensation may occur: • When the DVD+Hi-Fi VCR is moved from a cold place to a warm place. • Under extremely humid conditions. • Keep the DVD+Hi-Fi VCR plugged into an AC power outlet with POWER On. This will help prevent condensation. • When condensation has occurred, wait a few hours for the DVD+Hi-Fi VCR to dry before using it. 42