Lacie 300760U User Manual - Page 25
Troubleshooting, lacie.com
UPC - 093053618285
View all Lacie 300760U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
LaCie DVD±RW Drive User's Manual FireWire Troubleshooting page 25 5. Troubleshooting In the event that your LaCie DVD±RW Drive is not working correctly, please refer to the following checklist to find out where the problem is coming from. If you have gone through all of the points on the checklist and your drive is still not working correctly, please have a look at the FAQs that are regularly published on our Web site - www.lacie.com. One of these FAQs may provide an answer to your specific question. You can also visit the drivers pages, where the most recent software updates will be available. If you need further assistance, please contact LaCie Technical Support (see 6. Contacting Customer Service for details). Manual Updates LaCie is constantly striving to give you the most up-to-date, comprehensive User's Manuals available on the market. It is our goal to provide you with a friendly, easy-to-use format that will help you quickly install and utilize the many functions of your new device. If your manual does not reflect the configurations of the product that you purchased, please check our Web site for the most current version available. The Issue Questions to Ask Possible Solutions The drive is not recognized. Is the drive's power on? Check to see that all of the power cords are properly connected and that the switch on the rear of the drive is turned on. If you are using a surge protector, make sure that it is switched on, too. Does an icon for the drive appear Check for an icon on the Desktop (on a Mac, a disc has to be on the computer (On a Mac a CD- inserted in the drive) or in My Computer (on a PC). ROM must be inserted in the drive)? Are all of the cables connected securely and correctly? Make sure that all the steps in section 2. Getting Connected have been followed correctly. Examine the connections carefully to ensure that all the cables are inserted in the correct orientation and in the correct location. Are both ends of the FireWire cable Check both ends of the FireWire cable. Disconnect them, wait connected and properly seated? 10 seconds, and reconnect them. If the drive is still not recognized, restart your computer and try again.