Lacie 301504 User Manual - Page 12

Turning On the d2 Network, TECHNICAL NOTE

Get Lacie 301504 PDF manuals and user guides View all Lacie 301504 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

LaCie d2 Network User Manual 2.1. Turning On the d2 Network The power supply kit is composed of two cables: one cable (A) connects to the LaCie drive; and the other cable (B) connects to a power outlet, such as a wall outlet or a surge protector (Fig. 04). 1. Connect Cable A to the d2 Network. 2. Connect Cable B to the power supply brick (C). 3. Connect Cable B to a surge protector or wall outlet. 4. Turn on the drive by moving the power switch on the back of the drive to the "on" position. The d2 Network may take up to 60 seconds to boot up. CAUTION: Only use the AC adapter supplied with your specific LaCie device. Do not use a power supply from another LaCie device or another manufacturer. Using any other power cable or power supply may cause damage to the device and void your warranty. Always remove the AC adapter before transporting your LaCie drive. Failure to remove the adapter may result in damage to your drive and will void your warranty. TECHNICAL NOTE: You may use your LaCie drive when in a foreign country thanks to its 100-240 Volt power supply. To be able to use this feature, you may need to purchase an appropriate adapter or cord. LaCie accepts no responsibility for any damage to the drive resulting from the use of an inappropriate adapter. Using an adapter other than one authorized by LaCie will void your warranty. Setting Up Your LaCie d2 Network page 12 Fig. 04

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
LaCie d2 Network
Setting Up Your LaCie d2 Network
User Manual
page 12
2.1. Turning On the d2 Network
The power supply kit is composed of two cables: one cable (
A
) con-
nects to the LaCie drive; and the other cable (
B
) connects to a power
outlet, such as a wall outlet or a surge protector (
Fig. 04
).
1. Connect Cable
A
to the d2 Network.
2. Connect Cable
B
to the power supply brick (
C
).
3. Connect Cable
B
to a surge protector or wall outlet.
4. Turn on the drive by moving the power switch on the back of the
drive to the “on” position.
The d2 Network may take up to 60 seconds to boot up.
CAUTION:
Only use the AC adapter supplied with your specific La-
Cie device. Do not use a power supply from another LaCie device or
another manufacturer. Using any other power cable or power supply
may cause damage to the device and void your warranty.
Always remove the AC adapter before transporting your LaCie drive.
Failure to remove the adapter may result in damage to your drive
and will void your warranty.
TECHNICAL NOTE:
You may use your LaCie drive when in a for-
eign country thanks to its 100-240 Volt power supply. To be able to
use this feature, you may need to purchase an appropriate adapter
or cord. LaCie accepts no responsibility for any damage to the drive
resulting from the use of an inappropriate adapter. Using an adapter
other than one authorized by LaCie will void your warranty.
Fig. 04