Lacie 4big Quadra User Manual - Page 28
Other Troubleshooting Topics, 4.3. Installing New Firmware,
View all Lacie 4big Quadra manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
LaCie 4big Quadra Enterprise Class • Design by Neil Poulton User Manual Troubleshooting page 28 4.2. Other Troubleshooting Topics Problem The 4big is not recognized by the computer. The 4big is working slowly. The power supply is no longer functional. Solutions If there is no icon for the 4big on the desktop (Mac users) or in My Computer (Windows users): ✦✦ Check the interface cable connection. Check both ends of the FireWire, eSATA or USB cables and make sure that they are fully seated in their respective ports. Try disconnecting the cables, waiting 10 seconds, and then reconnecting them. If the drive is still not recognized, restart your computer and try again. ✦✦ Make sure your product is not encrypted. If so, you will need to run the LaCie Desktop Manager software. ✦✦ Make sure your computer meets the minimum system requirements for compatibility with the 4big Quadra. See section 1.1. Minimum System Requirements for more information. ✦✦ Make sure the power supply is properly connected (see section 2.2. Turn On the 4big), that the drive has been turned on by pressing the On/Off/Auto button the back of the drive, and that the outlet the power supply is connected to is also turned on. ✦✦ Make sure that the drive has been formatted properly. Please see section 3.4. Formatting and Partitioning. If other USB, eSATA or FireWire devices are connected to the same port or hub, disconnect the other devices and see if the 4big's performance improves. Replacement power supply cords are available for purchase on the LaCie Web page: www.lacie.com 4.3. Installing New Firmware LaCie may periodically offer firmware updates for the 4big. Visit LaCie's Web site, www.lacie.com, for the latest firmware update. For the procedure, please contact LaCie technical support.