Lacie d2 Quadra User Manual - Page 9
Hard Disk Heat Management, Heat Dissipation Design, Upright, Stack & Rackmount Configuration
View all Lacie d2 Quadra manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
LaCie d2 Quadra Enterprise Class • Design by Neil Poulton User Manual Introduction page 9 1.4. Hard Disk Heat Management Heat Dissipation Design The LaCie d2 Quadra's metal body is ideal for naturally dissipating internal drive heat. Its unique design actually draws heat away from the internal drive toward the external casing. The large surface area of the heat sink casing absorbs internal heat and dissipates it, keeping the drive safe and prolonging its life and reliability. As a consequence, it is normal that the external casing is warm to the touch. Please make sure that the vent on the back-bezel is not obstructed and that there is a natural airflow across the casing. Upright, Stack & Rackmount Configuration Heat dissipation is maximized when the d2 Quadra is in the upright position. When stacking LaCie d2 Quadras, please remember to attach the included rubber feet on the under side of your drives. This will allow for some airflow between your drives so that the heat dissipation can work effectively. LaCie does not recommend stacking or racking more than three d2 drives on top of each other, especially if these drives are turned on simultaneously. Exclusive d2 Heat Sink Design Provides 60% more area for heat dissipation Heat Sink Design Standard Design