Lantronix C4110-4848 Installation Guide Rev C PDF 1.20 MB - Page 15

Transition Networks C4110 Install Guide Accessing the C4110 The C4110 can be accessed through an Ethernet network connection on the IONMM installed in the ION chassis along with the C4110. The network connection can be done via a Telnet session or a Web graphical user interface (GUI). Installing the USB Driver (Windows XP) IMPORTANT The following driver installation instructions are for the Windows XP operating system only. Installing the USB driver using another operating system is similar, but not necessarily identical to the following procedure. To install the USB driver on a computer running Windows XP, do the following. 1. Extract the driver from the TN website and place it in an accessible folder on the local drive of the PC. You must log in or create an account to download firmware. For further assistance see the "Contact Us" section. 2. Connect the C4110 to the USB port on the PC. Note: for slide-in modules installed in an ION Chassis, the USB connection will be made to the ION Management Module (IONMM) if one is installed in the ION chassis. The Welcome to the Found New Hardware Wizard window displays. 3. Select No, not this time. 4. Click Next. The installation options window displays. 5. Select Install from a list or specific location (Advanced). 6. Click Next. The driver search installation options window displays. 7. Click Browse. 8. Locate and select the USB driver downloaded in step 1 above. 9. Click Next. Driver installation begins. 10. When the finished installing screen displays, click Finish. The USB driver installation is complete. You must now configure access the C4110 via an Ethernet network. 33572 Rev. B https://www.transition.com/ Page 15 of 33