Lantronix E-MCR-05 User Guide Rev C PDF 660.15 KB - Page 7

Maintenance

Get Lantronix E-MCR-05 PDF manuals and user guides View all Lantronix E-MCR-05 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

Transition Networks E-MCR-05 User Guide Maintenance Replace Fuse Description: FUSE, 4A, 250V, 5X20MM, FAST-BLO. See Input Power / Fuse Label on page 5 above. 1. Turn the power rocker switch to the OFF position (O) as shown below. 2. Remove the power cord from the power supply of the E-MCR-05. 3. Insert a small flat-blade screwdriver at the fuse holder as shown below and pull or carefully pry outward to dislodge the fuse holder. 4. Remove the fuse from the fuse holder. 5. Install a new 4A fuse "ONLY" into the fuse holder. 6. Install the fuse holder into E-MCR-05. 7. Plug the power cord into the E-MCR-05 AC power inlet. 8. Press the power switch to the ON position (I) and media converter power LEDs should turn ON. 33392 Rev. C https://www.transition.com/ Page 7 of 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
Transition Networks
E-MCR-05 User Guide
33392 Rev. C
Page 7 of 12
Maintenance
Replace Fuse
Description: FUSE, 4A, 250V, 5X20MM, FAST-BLO. See
Input Power / Fuse Label
on page
5
above.
1.
Turn the power rocker switch to the OFF position (O) as shown below.
2.
Remove the power cord from the power supply of the E-MCR-05.
3.
Insert a small flat-blade screwdriver at the fuse holder as shown below and pull or carefully pry outward to
dislodge the fuse holder.
4.
Remove the fuse from the fuse holder.
5.
Install a new 4A fuse “ONLY” into the fuse holder.
6.
Install the fuse holder into E-MCR-05.
7.
Plug the power cord into the E-MCR-05 AC power inlet.
8.
Press the power switch to the ON position (I) and media converter power LEDs should turn ON.