Lantronix EMG 8500 - Edge Management Gateway EMG User Guide - Page 26

2: Introduction Protocol Support The EMG supports the following protocols:  TCP/IP network protocol  SSH, TLS, SSL, Telnet and TCP for connections in and out of device ports  DHCP and BOOTP for dynamic IP address assignment  DNS for IP address name resolution  SNMP for remote monitoring and management  SCP, FTP, and SFTP for file transfers and firmware upgrades  TFTP for firmware upgrades  SMTP for mail transfer  HTTPS (SSL) for secure browser-based configuration  NTP for time synchronization  UDP, PPP with PAP/CHAP, NFS and CIFS for data storage  LDAP/AD, NIS, RADIUS with VSA support, CHAP, PAP, Kerberos, TACACS+, and SecurID (via RADIUS) for remote authentication  Callback Control Protocol (CBCP) for PPP server callback  StrongSwan IPsec for VPN access For brief descriptions of these protocols, see Appendix D: Protocol Glossary on page 480. Configuration Methods After installation, the EMG requires configuration. For the unit to operate correctly on a network, it must have a unique IP address on the network. This IP address references the specific unit. For details on how to configure the unit with basic network settings, see Chapter 5: Quick Setup. The EMG provides the following methods for logging into the unit to configure EMG settings monitor performance:  Web Manager: View and configure all settings through a secure, encrypted web interface using most web browsers (Firefox, Chrome, or Internet Explorer with the latest browser updates). See Chapter 6: Web and Command Line Interfaces.  Command Line Interface (CLI): The command mode may be accessed through Telnet, SSH, Web Telnet/SSH or connecting a terminal (or a PC running a terminal emulation program) to the unit's console port. See Chapter 6: Web and Command Line Interfaces. EMG™ Edge Management Gateway User Guide 26