Lantronix EPS2-100 EPS Reference Manual - Page 148
Set Privileged/Noprivileged, Set/Define Protocols Commands
View all Lantronix EPS2-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
Set Privileged/Noprivileged Command Reference 12.26 Set Privileged/Noprivileged SET PRIVILEGED [ OVERRIDE ] NOPRIVELEGED Changes the current port's privilege status, provided the correct privileged password is entered. The factory default privileged password is system; this password can be changed with the Set Server Privileged Password command. If the password is forgotten, the Server can be reset to factory defaults. Note: Applies To Only one port on the Server can be privileged at any time. EPS1, EPS2, EPS2-100, EPS4-100, MPS1, MPS100, LPS1 Restrictions The user must know the privileged password. Secure users cannot become privileged. Parameters Override Forces the current port to become the privileged port; the previously privileged port loses the privilege. Examples Local> SET NOPRIVILEGED Password> system (not echoed) Local> SET PRIVILEGED OVERRIDE Password> system (not echoed) See Also Set/Define Server Privileged Password, page 12-46; Privileged Password, page 3-8. 12.27 Set/Define Protocols Commands 12.27.1 Define Protocols AppleTalk SET DEFINE PROTOCOLS APPLETALK ENABLED DISABLED DEVICETYPE name ZONE ZoneName Enables or Disables the AppleTalk protocol on the Server, and allows placement of the Server into a zone other than the default when there is more than one available AppleTalk zone. Applies To EPS1, EPS2, EPS2-100, EPS4-100, MPS1, MPS100 12-28