Lantronix EPS2-100 EPS Reference Manual - Page 151

Command Reference Set/Define Protocols Commands Note: See Also Because the LAT license string is stored in NVR, it must be re-entered after resetting the unit to factory defaults or restoring NVR. LAT, page 2-4. 12.27.5 Set/Define Protocols NetWare                        SET   DEFINE   PROTOCOLS NETWARE                           ENABLED     DISABLED       ALL    ACCESS fileserver    LOCAL   DSCONTEXT context   DSLICENSE LicenseString  DSTREE treeString   ENCAPSULATION 802_2 ETHER_II NATIVE SNAP     ENABLED     DISABLED     INTERNAL [NETWORK] netnum   LOADHOST   fileserver    NONE  POLLnum    PRINTSERVER  pserver    NONE     RESET     RIP  ENABLED   SAP DISABLED      ROUTING  ENABLED  DISABLED   Enables or disables the NetWare protocol, and configures NetWare-related settings. Applies To EPS1, EPS2, EPS2-100, EPS4-100, MPS1, MPS100, LPS1 Restrictions You must be the privileged user to use this command. Enabled/Disabled can only be configured using the Define command. Parameters Access Allows configuration of a list of fileservers that the Server will contact for print jobs. By default, only fileservers on the local network will be queried; this command can be used to add or remove additional fileservers. 12-31