Lantronix M110 Series Command Reference - Page 8

1: Introduction

The aim of this document is to provide users of Lantronix M110 Modems running mPACK, a detailed de-

scription of the commands supported by mPACK and various configuration / operation modes in which

M110 series Modems could be used.

Safety Precautions

General Precautions

–

The modem generates radio frequency (RF) power. When using the modem care must be taken on

safety issues related to RF interference as well as regulations of RF equipment.

–

Do not use the modem in aircraft, hospitals, petrol stations or in places where using GSM products is

prohibited.

–

Be sure that the modem will not be interfering with nearby equipment. For example: pacemakers or

medical equipment. The antenna of the modem should be away from computers, office equipment,

home appliances, etc...

–

An external antenna must be connected to the modem for proper operation.

Only used approved

antennas with the modem. Please contact authorized dealer on finding an approved antenna.

–

Always keep the antenna with minimum safety distance of 26.6 cm or more from human body.

–

Do not put the antenna inside metallic box, containers, etc.

Protecting your modem

To ensure error-free usage, please install and operate your modem with care. Remember the following:

–

Do not expose the modem to extreme conditions such as high humidity/temperatures, rain, direct

sunlight, caustic/harsh chemicals, dust, or water.

–

Do not try to disassemble or modify the modem. There is no user serviceable part inside and the

warranty would be void.

–

Do not drop, hit or shake the modem. Do not use the modem under extreme vibrating condition.

–

Do not pull the antenna or power supply cable. Please attach or detach by holding the connector.

–

Connect the modem only according to the instruction manual. Failure to do it will void the warranty.

1.1

M110 series supported by mPACK

Please consult the sales representative of Lantronix for the most update information.

** Uplink / Downlink maximum data rates:

M110 Series Cellular Modem mPACK Command Reference

7

Section	Page
1 Introduction	8
1.1 M110 series supported by mPACK	8
2 Basic Operation	10
2.1 Modes of Operation	10
2.2 Getting Started	10
2.3 Default settings	11
2.4 Basic Command Syntax	11
2.5 LED Status Indicator	11
2.6 Factory reset	12
3 Administration Commands	13
3.1 AT#INFO	13
3.2 AT#CONFIGDEL	13
3.3 AT#RESET	14
3.4 AT#MRST	14
3.5 AT#NWRST	14
3.6 AT#MATSCR	15
3.7 AT#USBATCOM	16
3.8 AT#PASS	16
3.9 AT#STRUPMSG	17
4 Hardware commands	19
4.1 AT#SERIAL	19
4.2 AT#HFLW	19
4.3 AT#SETRTC	20
4.4 AT#GETRTC	21
4.5 AT#VIO	21
4.6 AT#VAMODE	22
4.7 AT#RDIO	23
4.8 AT#OPSET	23
5 Last Gasp Commands	25
5.1 AT#LGPARA	25
5.2 AT#LGMSG	25
6 Cellular Commands	27
6.1 AT#IPCELLULAR	27
6.2 AT#IPCONNECT	27
6.3 AT#GETBRIP	28
6.4 AT#IPPING	28
7 Socket Commands	30
7.1 AT#IPTCP	30
7.2 AT#IPUDP	31
7.3 AT#AUTOTCP	31
7.4 AT#AUTOUDP	32
7.5 AT#OTCP	33
7.6 AT#OUDP	33
7.7 AT#SCHOST	34
7.8 AT#IPOPT	34
7.9 AT#AUOPT	36
7.10 AT#SERVAUTH	37
7.11 AT#MURC	37
8 Remote Control Commands	39
8.1 AT#SMSAT	39
8.2 AT#TCPTERM	40
9 Firmware Update Commands	42
9.1 AT#WEBUPDATE	42
9.2 AT#UPDATE	42
10 D2Sphere Commands	44
10.1 AT#IPD2S	44
10.2 AT#D2S	44
10.3 AT#DVNAME	45
10.4 How to add a M110 modem to D2sphere platform (feature)	45
10.5 Operation of D2sphere	46
11 I/O Triggering Commands	47
11.1 AT#DITRIG	47
11.2 AT#DITRIGENB	47
11.3 AT#MSGPER	48
11.4 AT#MSGSTR	49
11.5 AT#TRANSMODE	49
12 Location Commands	51
12.1 AT#MLOC	51
13 Applications Notes	52
13.1 Cellular Setup Example	52
13.2 AutoTCP Client Setup Example	52
13.3 AutoTCP Server Setup Example	53
13.4 Flow diagram of Auto TCP/UDP Connection	54
14 Troubleshooting	56
14.1 The modem’s LED does not light	56
14.2 The modem’s GREEN LED blinks but does not become stable for a long time after power up	56

Lantronix M110 Series Command Reference - Page 8

Introduction

Page 8 highlights