Lantronix N-TGE-SFP-02 N-TGE-SFP-02 User Guide Rev B - Page 11

Lantronix N-TGE-SFP-02 User Guide 5. Remove the N-TGE-SFP-02 NIC from the shipping package and store the packaging material in a safe location. A Standard Profile bracket is included with the NIC; install the optional Low Profile bracket if the installation device requires it. Caution: Wear a grounding device and observe electrostatic discharge precautions when installing the NIC in a system. Failure to observe this caution could result in damage to the NIC. 6. Applying even pressure at both corners of the NIC, push the NIC until it is firmly seated in the PCIe slot. Excessive force could break the connector; use caution when pressing the board in the slot. Make sure the NIC is securely seated (see below). 7. Put the system cover back on and fasten it with the screws removed in Step 2 above. 8. Connect the fiber optic cable. 9. Disconnect any personal antistatic devices. 10. Reconnect power cord to device 11. Power the system on. 33819 Rev. B https://www.lantronix.com/ 11