Lantronix N-TGE-SFP-02 N-TGE-SFP-02 User Guide Rev B - Page 6
Specifications
View all Lantronix N-TGE-SFP-02 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Lantronix N-TGE-SFP-02 User Guide Specifications Standards compliance Bus Slot Fiber Cable Data Rate (full duplex) Dimensions Power Consumption Power Source Nominal Voltage Operating Temperature Storage Temperature Altitude Humidity Weight Regulatory Compliance MTBF Warranty IEEE 802.3-2008, IEEE 802.3ae, IEEE 802.3z, IEEE 802.3x, IEEE 802.3 ad, IEEE 802.1Q, IEEE 802.1p PCIe 3.0 x8 Fiber (multimode): 50/125,62.5/125μm Fiber (single mode): 9/125μm 10 Gbps: 14,880,000 pps 1 Gbps: 1,190,476 pps 2.525" [64.135 mm] x 6.173" [156.79 mm] x .75" [19.05 mm] 2.5W without SFP PCIe slot 120/230V / 60/50Hz 0°C to +50°C -15°C to 65°C 0-10,000 feet 5% to 95% (non-condensing) 0.55 lbs. (0.25 kg.) EN 55024:2010 EN 55032:2012 FCC Part 15 Class B ICES-003:2017 (ITE) CE Mark 4,636,228 hours. ENV: GB TEMP: 30.00 C. TELCORDIA CALCULATION METHOD: PartsCount (Method I) Limited Lifetime warranty Note: The supported fiber type and transmission distance depend on the SFP/SFP+ module installed in the NIC's SFP slot. Note that SFP and SFP+ modules are sold separately. See the Lantronix SFP webpage. Note: Only 1G SFP modules that support DMI are recognized by the NIC Intel driver. Note: 1G SFP modules must be installed before powering on the PC to work correctly. Reset Signals Any reset signal will come from the host system via the PCIe bus. 33819 Rev. B https://www.lantronix.com/ 6