Lantronix NM2-FXS-2230-SFP-01 Installation Guide Rev D - Page 14

For More Information, Status LED, Troubleshooting, Dell User and System Guides

Get Lantronix NM2-FXS-2230-SFP-01 PDF manuals and user guides View all Lantronix NM2-FXS-2230-SFP-01 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

Lantronix NM2-FXS-2230-SFP-01 Install Guide For More Information To view the Dell™ OptiPlex™ User's Guide at the Support Center web page: 1. Click Start → Help and Support → Dell User and System Guides → System Guides. 2. Click the User's Guide for your computer. The User's Guide is also available on the optional Drivers and Utilities media. Support for Wyse 7040/7050 Thin Client is on the Dell Wyse support page. Status LED The Media Converter has a status LED for checking Link/Activity. MC LED 1: Link/Activity LED On = Link; Flashing = Activity. Color is amber when 100M. Troubleshooting This section lists some common problems, their causes, and potential recovery steps. 1. Confirm the Pre-Installation Checklist items on page 10. 2. Verify the Hardware Installation Procedure on page 11. 3. Check that the cabling is securely attached. See the FOA troubleshooting guide or the SFP manual. 4. Check for a mismatch of speed, duplex, protocol, or cable type. 5. Make sure the TN-SFP-GE-100FX is plugged in to the open SFP slot before you power on the PC. Failure to do so will cause the device to fail, in which case you must shut down and restart the PC. 6. Use the troubleshooting procedures in the Dell™ OptiPlex™ User's Guide. 7. Use the troubleshooting procedures on the PXE Boot Loader webpage as required. 8. Use the troubleshooting procedures on the Intel i210 PROSet Drivers webpage as required. 9. Verify that the link partner is active and can send/receive traffic; make sure partner settings match; verify that the port is enabled; try connecting to another port or link partner. Check for incompatible or conflicting devices / settings. 10. Run Windows Device Manager and scan for changes. 11. Check if the PC's BIOS version is appropriate and update to the latest. See the PC documentation. 12. Run the PC diagnostics (e.g., Dell Quick Test or Dell pre-boot diagnostics). 13. Automatically detect and update drivers and software if you are connected to the Internet from the computer that needs updated drivers from http://www.intel.com/support/network/sb/CS-031482.htm. 14. Record information and contact Technical Support. See Recording Model and System Information below. For More Information Technical information in this document is subject to change without notice. See our SFP Products for more information. The Fiber Optic Association, Inc. provides a Technical Bulletin on "Guidelines For Testing And Troubleshooting Fiber Optic Installations" at http://www.thefoa.org/tech/guides/TT3.pdf Other FOA Technical Bulletins to be used as references for the design and planning of the network can be downloaded from the FOA Tech Topics website. 33730 Rev. D https://www.lantronix.com/ Page 14 of 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
Lantronix
NM2-FXS-2230-SFP-01 Install Guide
33730 Rev. D
Page
14
of
17
For More Information
To view the Dell™ OptiPlex™ User’s Guide at the
Support Center
web page:
1.
Click Start → Help and Support
→
Dell User and System Guides
→ System Guides.
2.
Click the User’s Guide for your computer.
The User’s Guide is also available on the optional Drivers and Utilities media.
Support for Wyse 7040/7050 Thin Client is on the
Dell Wyse support page
.
Status LED
The Media Converter has a status LED for checking Link/Activity.
MC LED 1: Link/Activity LED On = Link; Flashing = Activity. Color is amber when 100M.
Troubleshooting
This section lists some common problems, their causes, and potential recovery steps.
1
. Confirm the
Pre-Installation Checklist
items on page
10
.
2
. Verify the
Hardware Installation Procedure
on page
11
.
3.
Check that the cabling is securely attached. See the
FOA troubleshooting
guide or the SFP manual.
4
. Check for a mismatch of speed, duplex, protocol, or cable type.
5
. Make sure the TN-SFP-GE-100FX is plugged in to the open SFP slot before you power on the PC. Failure to do so will
cause the device to fail, in which case you must shut down and restart the PC.
6
. Use the troubleshooting procedures in the
Dell™ OptiPlex™ User’s Guide
.
7
. Use the troubleshooting procedures on the
PXE Boot Loader webpag
e as required.
8
. Use the troubleshooting procedures on the
Intel i210 PROSet Drivers webpage
as required.
9
. Verify that the link partner is active and can send/receive traffic; make sure partner settings match; verify that the port is
enabled; try connecting to another port or link partner. Check for incompatible or conflicting devices / settings.
10
. Run Windows Device Manager and scan for changes.
11
. Check if the PC’s BIOS version is appropriate and update to the latest. See the PC documentation.
12
. Run the PC diagnostics (e.g.,
Dell Quick Test
or
Dell pre-boot diagnostics
).
13
. Automatically detect and update drivers and software if you are connected to the Internet from the computer that
needs updated drivers from
.
14
. Record information and contact Technical Support. See
Recording Model and System Information
below.
For More Information
Technical information in this document is subject to change without notice. See our
SFP Products
for more information.
The Fiber Optic Association, Inc. provides a Technical Bulletin on “Guidelines For Testing And Troubleshooting Fiber
Optic Installations” at
Other FOA Technical Bulletins to be used as references
for the design and planning of the network can be downloaded from the
FOA Tech Topics website
.