Lantronix NM2-FXS-2230-SFP-01 Installation Guide Rev D - Page 5

Lantronix NM2-FXS-2230-SFP-01 Install Guide Note that this NM2-FXS-2230-SFP-01 SFP transceiver is sold separately and also as a part of Lantronix' NM2-FXS-2230SFP-01 M.2 100-Base-FX Ethernet Fiber NIC. See the applicable SFP manual for more information on the SFP bundled with the M.2 NIC. M.2 Specifications M.2 module naming per specification: 2230-D4-A-E. Key IDs: A and E. Jumbo frame support: 9014 bytes. PXE boot loader image pre-loaded. Uses standard i210 PROSet drivers from Intel. Operating system support: Windows 10 32/64bit; Windows 8 and 8.1 32/64-bit; Windows 7 32/64-bit; Linux. Standards IEEE 802.3-2012 Bus Slot M.2 - 2230-D4-A-E, Key IDs: A and E. Data Rate 100 Mbps (FDX only). Max Frame Size 9014 bytes Status LED MC LED 1: Link/Activity LED. LINK/ACT (Amber ON = Link; Flashing = Activity). Color is amber when 100M. Dimensions: M.2 NIC: Fiber Optic Adapter: FFC Cable: Width: 0.87" [22 mm] x Depth: 1.19" [30 mm] x Height: 0.12" [3.08 mm]. Width: 1.65" [42 mm] x Depth: 2.05" [52 mm] x Height: 0.51" [13 mm]. Length: 6" [15.3 cm] without right-angle bend; 5.5" [14 cm] with right-angle bend. Power Consumption NM2-FXS-2230-SFP-01: 120 mA at 3.3V (0.4 W typical) (not including SFP). Power Consumption SFP: 330mA at 3.3V, 1W typical. Power Source M.2 interface connector; 3.3V (refer to Table 41 of M.2 specification). Operating Temp. 0°C to +45°C (+32°F to +113°F). Storage Temp. -40°C to +85°C Humidity 5% to 95% (non-condensing). Altitude 0 - 10,000 ft. Weight 0.1 lbs. [0.05 kg] Compliance CE Mark; Emissions: EN55032, FCC Part 15; Class A; Immunity: EN55024. Data Speed: SFP optic at 100Mbs, full duplex only. Fiber Port (-SFP): 100Base-X open SFP slot. DIP Switches / Jumpers: None Warranty Lifetime 33730 Rev. D https://www.lantronix.com/ Page 5 of 17