Lantronix NM2-GXE-01 Series Installation Guide Rev D - Page 4

Lantronix NM2-GXE-2230-xx-01 Install Guide Product Description The Lantronix NM2-GXE-2230-xx-01 and 01-D are 1 Gigabit Ethernet Fiber NICs supporting the PCI Express M.2 specification. They are designed to install in the Dell OptiPlex 7040 and 7050 Micro PCs and the Wyse 7040/7050 Series thin clients. M.2 is known as the "next generation form factor" and is a specification for internally mounted computer expansion cards and associated connectors. Desktop PCs are being replaced by smaller computing devices (such as Thin Clients, Micro PCs, Ultrabooks, and Tablets) which typically have internal M.2 interfaces but do not have PCI or PCIe slots. Many users still need fiber Ethernet access, and without the external PCIe slot, there is no standard fiber interface on these devices. See the Dell OptiPlex 7040M Owner's Manual for important notes, cautions, and warnings. Read the section "Before working inside your computer" before proceeding. Ordering Information SKU Description NM2-GXE-2230-LC-01 One Gb Ethernet Fiber NIC supporting PCI Express M.2 specification (fixed LC). NM2-GXE-2230-SFP-01 One Gb Ethernet Fiber NIC supporting PCI Express M.2 specification (open SFP slot). NM2-GXE-2230-LC-01-D One Gb Ethernet Fiber NIC supporting PCI Express M.2 specification (fixed LC). NM2-GXE-2230-SFP-01-D One Gb Ethernet Fiber NIC supporting PCI Express M.2 specification (open SFP slot). Lantronix M.2 Gigabit Ethernet Fiber Network Interface Card (NIC) provides a fiber optic interface for the Dell OptiPlex™ 7040 and 7050 Micro PCs and the Wyse 7040/7050 Series thin clients. The NM2-GXE-2230-xx-01 or NM2-GXE-2230-xx01-D consist of a M.2 NIC that installs into the OptiPlex Micro PC's M.2 "E key" interface, a fiber optic adapter that installs into the OptiPlex Micro PC's Option port, and a 20-pin Flat Flex Cable (FFC) with right-angle bend that connects the NIC to the fiber adapter. The fiber optic adapter is available with either a 1000Base-SX LC optic or open SFP (SFP module sold separately). Features • 1 Gigabit Ethernet Fiber NIC • Installs in Dell OptiPlex™ 7040 and 7050 Micro PCs and the Wyse 7040/7050 Series thin clients • PCI Express M.2 compliant • A + E keyed M.2 interface • Full duplex • Flow control • Wake on LAN (WOL) • Smart Load Balancing (SLB) • TCP Segmentation Offload (TSO) • Message Signaled Interrupts (MSI) • Extended Message-Signaled Interrupts (MSI-X) • LACP support (Teaming) • IPv6 Capable • Supports UEFI • Supports PXE boot • Jumbo frame support 9014 bytes • 1000Base-SX multimode LC fiber connector or open SFP interface 33724 Rev. D https://www.lantronix.com/ Page 4 of 18