Lantronix S3220 Series CLI Reference Guide Rev G PDF 3.07 MB - Page 210

VLAN Commands Transition Networks Upgrade / Update Firmware Commands Note: These commands can only be entered at the device level - when the last part of the command line prompt indicates the location is a device (L1D, L2D or L3D). Show Firmware Database Update Results Syntax: show firmware-db update result Description: Displays the results of the "Update Firmware Database" command (whether or not the update was successful). If the update failed, this command will display the reason. This command must be entered from the IONMM card. Example 1: C0|S0|L1d/>show firmware-db update result Database file name: binary.zip Database update result: failure Database update fail reason: invalid input file Example 2: C1|S5|L1P2>show firmware-db update result Upgrade is only supported on IONMM card! C1|S5|L1P2>home C1|S7|L1D>show firmware-db update result Database file name: IONMM.bin.1.1.0.zip Database update result: success C1|S7|L1D> Example 3: C1|S7|L1D>show firmware-db update result Database file name: x323x.bin.1.1.0 Database update result: success Example 4: Agent III C1|S1|L1D>show firmware-db update result Database file name: Database update result: none Agent III C1|S1|L1D> 210 www.transition.com 33473 Rev. G