Lantronix SESPM Series Switch Manager Mobile App User Guide Rev D PDF 1.86 MB - Page 3

Transition Networks Switch Manager Mobile App User Guide 1. Introduction The Transition Networks SESPM1040-541-LT-xx Switch is a Layer 2 managed switch with (4) 10/100/1000Base-T PoE++ (IEEE 802.3bt) ports and (1) combination 10/100/1000Base-T RJ-45 or 100/1000Base-X SFP uplink port (additional optional ports available), that is ideal for use in security and surveillance, PoE lighting, digital signage and many other applications. The switch is equipped with Near Field Communication (NFC) to allow simple, repeatable switch configuration with a user-friendly app on a mobile device prior to connecting or powering up the switch. The switch allows Bluetooth Low Energy (BLE) remote access to alarm information or to read or change equipment settings without requiring physical access using inconvenient ladders or scissor lift rental. The switch also has integrated management software for setup, monitoring, and control of connected devices. The Switch Manager Mobile App provides mobile interface through NFC and BLE to connect to, allow switch configuration, and perform remote diagnosis and troubleshooting for the switch from a smart phone or tablet, without having to climb a ladder or scissor lift to connect to the switch. The integrated NFC saves time and labor expense by allowing laborers of any skill level to easily configure the switch prior to powering up and to repeat the configuration across multiple switches. The integrated BLE Antenna allows remote access to the switch for troubleshooting and changing settings, reducing time and hassles related to console cables and ladders or scissor lifts. Related Manuals The following manuals are available on the SESPM1040-541-lt-xx Series product page at https://www.transition.com/products/switch/sespm1040-541-lt-xx-series/ SESPM1040-541-LT-xx Quick Start Guide, 33783 SESPM1040-541-LT-xx Install Guide, 33772 SESPM1040-541-LT-xx Operation Guide, 33773 SESPM-4P-PMB Pole Mount Bracket Kit Option Install Guide, 33774 SESPM-4P-FMK Fiber Management Kit Option Install Guide, 33775 SESPM-4P-DIG Digital Input/Output Kit Option Install Guide, 33776 SESPM-2P-1G-CP One Gb Additional Combo Port Module Option Install Guide, 33779 SESPM-2P-24V-CP Option Install Guide, 33829 Release Notes (version specific) For More Information A printed Quick Start Guide is shipped with each switch. For Transition Networks Drivers, Firmware, etc. go to the Product Support webpage (logon required). For Transition Networks Manuals, Brochures, Data Sheets, etc. go to the Support Library (no logon required). Note: Information in this document is subject to change without notice. Note that this manual provides links to third party web sites for which Transition Networks is not responsible. 33789 Rev. D https://www.transition.com Page 3 of 27