Lantronix SGX 5150 Command Reference - Page 275
Sends Modem Response Codes out on the Serial Line., Sets the Modbus Response Timeout in milliseconds.
View all Lantronix SGX 5150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 275 highlights
5: Commands and Levels no additional port response timeout show show connections show history show statistics tcp server state disable tcp server state enable write modem (tunnel-modem:3) level commands clrscrn connect string default incoming connection default response type display remote ip disable display remote ip enable echo commands disable echo commands enable echo pluses disable echo pluses enable error unknown commands disable error unknown commands enable exit incoming connection automatic incoming connection disabled incoming connection manual no connect string reassert response type numeric response type text show show history show status verbose response disable verbose response enable write modem (tunnel-modem:2) level commands clrscrn connect string connections. Removes the additional TCP server port. Sets the Modbus Response Timeout in milliseconds. Displays the current configuration. Displays connections. Displays the last 20 commands entered during the current CLI session. Displays statistics. Disables the Modbus TCP Server. Enables the Modbus TCP Server. Stores the current configuration in permanent memory. Clears the screen. Sets the CONNECT string used in modem emulation. = connect string. Default disables incoming network connections. Default uses text type responses. The incoming RING has nothing following it. The incoming RING is followed by the IP address of the caller. Does not echo modem commands. Echoes modem commands. Does not echo the +++ characters when entering modem command mode. Echoes the +++ characters when entering modem command mode. Returns OK on unknown AT commands. Returns an error upon unknown AT commands. Returns to the tunnel level. Automatically answer incoming network connections. Disable incoming network connections. Wait for an ATA command before answering an incoming network connection. Removes optional CONNECT string information for modem emulation. Asserts tunnel modem status with current configured values. Uses numeric type responses. Uses text type responses. Displays the current configuration. Displays the last 20 commands entered during the current CLI session. Displays tunnel modem status. Does not send Modem Response Codes. Sends Modem Response Codes out on the Serial Line. Stores the current configuration in permanent memory. Clears the screen. Sets the CONNECT string used in modem emulation. SGX 5150 IoT Device Gateway Command Reference 275