Lantronix SGX 5150 Command Reference - Page 277
ntp config-clock-ntp level commands
View all Lantronix SGX 5150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 277 highlights
5: Commands and Levels exit Returns to the tunnel level. incoming connection automatic Automatically answer incoming network connections. incoming connection disabled Disable incoming network connections. incoming connection manual Wait for an ATA command before answering an incoming network connection. no connect string Removes optional CONNECT string information for modem emulation. reassert Asserts tunnel modem status with current configured values. response type numeric Uses numeric type responses. response type text Uses text type responses. show Displays the current configuration. show history Displays the last 20 commands entered during the current CLI session. show status Displays tunnel modem status. verbose response disable Does not send Modem Response Codes. verbose response enable Sends Modem Response Codes out on the Serial Line. write Stores the current configuration in permanent memory. ntp (config-clock-ntp) level commands clrscrn Clears the screen. default server Restores the default NTP server address. exit Exits to the next higher level. server Sets the NTP server address. show Shows the current configuration. show history Displays the last 20 commands entered during the current CLI session. write Stores the current configuration in permanent memory. on scheduled reboot (config-action:on scheduled reboot) level commands clrscrn Clears the screen. default delay Resets alarm processing delay to its default value. delay Sets the delay in processing the alarm. Alarm actions will not be executed if the cause is corrected within this time. email Enters the next lower level. exit Exits to the config alarm level. ftp put Enters the next lower level. http post Enters the next lower level. show Displays the current configuration. show history Displays the last 20 commands entered during the current CLI session. show status Displays statistics. snmp trap Enters the next lower level. write Stores the current configuration in permanent memory. packing (tunnel-packing:3) level commands clrscrn Clears the screen. default packing mode Sets to default packing mode, which is 'Disable' default send character Removes the send character for packing mode. default threshold Restores the default threshold. default timeout Restores the default packing mode timeout. SGX 5150 IoT Device Gateway Command Reference 277