Lantronix SISGM1040-284-LRT Installation Guide Rev E - Page 17
Table 4: Port Status LEDs, Color, State, Description
View all Lantronix SISGM1040-284-LRT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Lantronix SISGM1040-284-LRT Install Guide Check the port status by reading the LED behaviors per the table below. Table 4: Port Status LEDs LED RJ45 Ports UP * Color Green Green Amber Amber State Description On The port is enabled and has established a link to the connected device, and the connection speed is 1000Mbps. Blinking The port is transmitting/receiving packets, and the connection speed is 1000Mbps. On The port is enabled and has established a link to the connected device, and the connection speed is 10/100Mbps. Blinking The port is transmitting/receiving packets, and the connection speed is 10/100Mbps. The port has no active network cable connected, or it has not established a -- Off link to a connected device. Otherwise, the port may have been disabled via the switch user interface. SFP Ports Green Green Amber Amber On The port is enabled and has established a link to a connected device, and the connection speed is 1000Mbps. Blinking The port is transmitting/receiving packets, and the connection speed is 1000Mbps. On The port is enabled, has established a link to the connected device, and the connection speed is 100Mbps. Blinking The port is transmitting/receiving packets, and the connection speed is 100Mbps. The port has no active network cable connected, or it has not established a -- Off link to a connected device. Otherwise, the port may have been disabled via the switch user interface. 33808 Rev. E https://www.lantronix.com/ 17