Lantronix SISGM1040-284-LRT CLI Reference Guide Rev E - Page 17

Lantronix SISGM1040-284-LRT CLI Reference Command: firmware Description: Firmware upgrade/swap Syntax: firmware swap firmware upgrade [ save-host-key ] Parameters: swap Swap between Active and Alternate firmware image. upgrade Firmware upgrade. Uniform Resource Locator. It is a specific character string that constitutes a reference to a resource. Syntax: ://[[:]@][:][/ ]/ If the following special characters: space need to be contained in the input url string, they should have percent-encoded. A valid file name is a text string drawn from alphabet (A-Za-z), digits (0-9), dot (.), hyphen (-), under score (_). The maximum length is 63 and hyphen must not be first character. The file name content that only contains '.' is not allowed. save-host-key Save the Host key. Mode: Exec mode. Example: SISGM1040-284-LRT# firmware swap Alternate image activated, now rebooting. SISGM1040-284-LRT# firmware upgrade sftp://admin : admin ? % Incomplete word detected at '^' marker. SISGM1040-284-LRT# firmware upgrade tftp://admin:admin ? % Incomplete word detected at '^' marker. SISGM1040-284-LRT# Command: help Description: Description of the interactive help system Syntax: help Parameters: None. Mode: Exec mode. Example: SISGM1040-284-LRT# help Help may be requested at any point in a command by entering a question mark '?'. If nothing matches, the help list will be empty and you must backup until entering a '?' shows the available options. Two styles of help are provided: 1. Full help is available when you are ready to enter a command argument (e.g. 'show ?') and describes each possible argument. 2. Partial help is provided when an abbreviated argument is entered and you want to know what arguments match the input (e.g. 'show pr?'.) SISGM1040-284-LRT# 33810 Rev. E https://www.lantronix.com/ Page 17 of 210