Lantronix SLC 8000 User Guide - Page 116
Apply, Apply Settings, Device Ports
View all Lantronix SLC 8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
8: Device Ports Authentication CHAP Handshake Enables PAP or CHAP authentication for modem logins. PAP is the default. With PAP, users are authenticated by means of the Local Users and any of the remote authentication methods that are enabled. With CHAP, the CHAP Handshake fields authenticate the user. The Host/User Name (for UNIX systems) or Secret/User Password (for Windows systems) used for CHAP authentication. May have up to 128 characters. CHAP Auth Uses For CHAP authentication, determines what is used to validate the CHAP host/ user sent by the remote peer: either the CHAP Host defined for the modem, or any of the users in the Local Users list. Same authentication for Dial-in & Dial-on-Demand (DOD) Select this option to let incoming connections (dial-in) use the same authentication settings as outgoing connections (dial-on-demand). If this option is not selected, then the dial-on-demand connections take their authentication settings from the DOD parameter settings. If DOD Authentication is PAP, then the DOD CHAP Handshake field is not used. DOD Authentication Enables PAP or CHAP authentication for dial-in & dial-on-demand. PAP is the default. With PAP, users are authenticated by means of the Local Users and any of the remote authentication methods that are enabled. With CHAP, the DOD CHAP Handshake fields authenticate the user. DOD CHAP Handshake For DOD Authentication, enter the Host/User Name for UNIX systems) or Secret/User Password (for Windows systems) used for CHAP authentication. May have up to 128 characters. Enable NAT Select to enable Network Address Translation (NAT) for dial-in and dial-out PPP connections on a per modem (device port or USB port) basis. Users dialing into the SLC 8000 advanced console manager access the network connected to Eth1 and/or Eth2. Note: IP forwarding must be enabled on the Network > Network Settings page for NAT to work. See Chapter 6: Basic Parameters on page 59. Dial-out Number Phone number for dialing out to a remote system or serial device. May have up to 20 characters. Any format is acceptable. Remote/Dial-out Login Remote/Dial-out Password Retype Restart Delay CBCP Server Allow No Callback CBCP Client Type User ID for dialing out to a remote system. May have up to 32 characters. Password for dialing out to a remote system. May have up to 64 characters. Re-enter remote/dial-out password for dialing out to a remote system. May have up to 64 characters. The number of seconds after the timeout and before the SLC unit attempts another connection. The default is 30 seconds. For CBCP Server state, allows "No Callback" as an option in the CBCP handshake in addition to User-defined Number and Admin-defined Number. For CBCP Client, this selects the number that the client would like to use for callback - either a user-defined number passed to the server (specified by the Fixed Dial-back Number) or an administrator-defined number determined by the server based on the login that is PAP or CHAP authenticated. 3. To save settings for just this port, click the Apply button. 4. To save selected settings to ports other than the one you are configuring: - From the Apply Settings drop-down box, select none, a group of settings, or All. - In to Device Ports, type the device port numbers, separated by commas; indicate a range of port numbers with a hyphen (e.g., 2, 5, 7-10). SLC™ 8000 Advanced Console Manager User Guide 116