Lantronix TN-QSFP-40G Series TN-QSFP-40G User Guide Rev D - Page 6

QSFP+ Unpacking, TN-QSFP-40G-xx User Guide, Rev. D, of 16

Get Lantronix TN-QSFP-40G Series PDF manuals and user guides View all Lantronix TN-QSFP-40G Series manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

Lantronix TN-QSFP-40G-xx User Guide TN-QSFP-40G-SR-BD applications can include 40 Gigabit Ethernet interconnects, Datacom/Telecom switch & router connections, Data aggregation and backplane applications, Proprietary protocol and density applications. The TN-QSFP-40G-SR-BD provides an aggregate bandwidth of 40Gbps into a duplex LC cable. This allows reuse of the installed LC duplex cabling infrastructure for 40GbE application. Link distances up to 100 m using OM3 and 150m using OM4 optical fiber are supported. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm on one end and 900nm on the other end. The electrical interface uses a 38 contact QSFP+ type edge connector. The optical interface uses a conventional LC duplex connector. The TN-QSFP-40G-SR-BD is capable of over 100m transmission on OM3 Multimode Fiber (MMF)and 150m on OM4 MMF. • Without digital diagnostic functions • Temperature range 0°C to 70°C The TN-QSFP-40G-IR4 is a QSFP+ LR4 10km optical transceiver with DDM and SMF. It is compliant with 40G Ethernet IEEE802.3ba and 40GBASE-LR4 Standard and is QSFP+ MSA compliant. It supports up to 11.2Gb/s data rate per wavelength and up to 10km transmission on single mode fiber (SMF). Its operating case temperature is 0 to 70℃. The TN-QSFP-40G-IR4 has maximum power consumption of 2.5W using the LC duplex connector. The TN-QSFP-40G-IR4 is compliant to 40GBASE-LR4 of the IEEE P802.3ba standard. QSFP+ Unpacking Before you start installing the TN-QSFP-40G-xx, verify that the package contains the following items: o One TN-QSFP-40G-xx SFP o Two protective foam pieces o One Documentation Postcard Notify your sales representative immediately if any of the above items is missing or damaged. Save the packaging for possible future use. The optical ports of the QSFP+ transceiver must be terminated with an optical connector or with a dust plug. The QSFP+ transceiver must be operated within the specified temperature and voltage limits. 33684 Rev. D https://www.lantronix.com/ Page 6 of 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
Lantronix
TN-QSFP-40G-xx User Guide
33684 Rev. D
Page 6 of 16
TN-QSFP-40G-SR-BD
applications can include 40 Gigabit Ethernet interconnects,
Datacom/Telecom switch & router connections, Data aggregation and backplane
applications, Proprietary protocol and density applications. The TN-QSFP-40G-SR-BD
provides an aggregate bandwidth of 40Gbps into a duplex LC cable. This allows reuse
of the installed LC duplex cabling infrastructure for 40GbE application. Link distances
up to 100 m using OM3 and 150m using OM4 optical fiber are supported. These
modules are designed to operate over multimode fiber systems using a nominal
wavelength of 850nm on one end and 900nm on the other end. The electrical interface
uses a 38 contact QSFP+ type edge connector. The optical interface uses a
conventional LC duplex connector.
The
TN-QSFP-40G-SR-BD
is capable of over 100m transmission on OM3 Multimode Fiber (MMF)and
150m on OM4 MMF.
•
Without digital diagnostic functions
•
Temperature range 0°C to 70°C
The
TN-QSFP-40G-IR4
is a QSFP+ LR4 10km optical transceiver with DDM and SMF. It is compliant with
40G Ethernet IEEE802.3ba and 40GBASE-LR4 Standard and is QSFP+ MSA compliant. It supports up to
11.2Gb/s data rate per wavelength and up to 10km transmission on single mode fiber (SMF). Its
operating case temperature is 0 to 70
℃
. The TN-QSFP-40G-IR4 has maximum power consumption of
2.5W using the LC duplex connector. The TN-QSFP-40G-IR4 is compliant to 40GBASE-LR4 of the IEEE
P802.3ba standard.
QSFP+ Unpacking
Before you start installing the TN-QSFP-40G-xx, verify that the package contains the following items:
o
One TN-QSFP-40G-xx SFP
o
Two protective foam pieces
o
One Documentation Postcard
Notify your sales representative immediately if any of the above items is missing or damaged. Save the
packaging for possible future use.
The optical ports of the QSFP+ transceiver must be terminated with an optical connector or with a dust
plug. The QSFP+ transceiver must be operated within the specified temperature and voltage limits.