Lantronix WiPort NR WiPort NR - Integration Guide - Page 7

2: Description and Specifications The WiPort NR embedded device server allows Original Equipment Manufacturers (OEMs) to add network connectivity to their products by incorporating it onto a circuit board with minimal engineering. The WiPort NR functions independently of a PC, providing an integrated solution that combines a processor, memory, and dual high-speed serial ports into a single compact module. It includes an operating system, an embedded Web server, and a full TCP/IP protocol stack. In addition, the WiPort NR sends email alerts and supports numerous other network communication protocols, including ARP, UDP, TCP, ICMP, Telnet, AutoIP, DHCP, HTTP and SNMP. WiPort NR Overview The WiPort NR contains Lantronix's own DSTni controller with 256 Kbytes of internal zero wait state SRAM, 16 Kbytes of boot ROM, and integrated 10/100 PHY. The WiPort NR also contains the following: ‹ Two 3.3-volt v24 serial interfaces (5V tolerant) ‹ Up to 921600 Baud ‹ 16 or 32Mbit flash memory (with optional additional 8Mbit SRAM) ‹ 48 MHz clock ‹ 11 configurable pins ‹ 10/100 Ethernet interface The WiPort NR requires +3.3-volt power and is designed to operate within a temperature range of -30ºC to +70ºC. WiPort NR™ Integration Guide 7