Lantronix XChip Direct XChip Direct - User Guide - Page 15
Using DeviceInstaller, Assigning an IP Address
View all Lantronix XChip Direct manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
3: Using DeviceInstaller This chapter covers the steps for getting the XPort Direct online and viewing its current configuration. Installing DeviceInstaller To install DeviceInstaller if your product comes with a CD: 1. Insert the CD into your CD-ROM drive. The CD automatically starts and displays the main window. 2. If the CD does not launch automatically: a) Click the Start button on the Task Bar and select Run. b) Enter your CD drive letter, colon, backslash, Launch.exe (e.g., D:\Launch.exe). 3. Click the DeviceInstaller button. The installation wizard window displays. 4. Respond to the installation wizard prompts. Note: For more information about DeviceInstaller, see the DeviceInstaller online Help. To install DeviceInstaller from the Lantronix web site: 1. Download DeviceInstaller for your product from the Lantronix website (www.lantronix.com/support/downloads.html). 2. Click Setup.Exe. The installation wizard window displays. 3. Respond to the installation wizard prompts. Note: For more information about DeviceInstaller, see the DeviceInstaller online Help. Assigning an IP Address The unit's IP address must be configured before it can work correctly on a network. You have several options for assigning an IP to your unit. We recommend that you manually assign the IP address over the network using DeviceInstaller software, which is on the product CD. Note: To use a serial connection instead of an Ethernet connection to configure the device, see 4: Configuration via Telnet or Serial Port (Setup Mode) on page 20. DeviceLinx™ XPort Direct/XChip Direct SoC User Guide 15