Lantronix XPort AR XPort AR - Command Reference - Page 91
Removes the Local IP address., Unzeros Query Port counters
View all Lantronix XPort AR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
username write ppp 2 (ppp:2) level commands authentication mode chap authentication mode ms-chap authentication mode ms-chapv2 authentication mode none authentication mode pap clrscrn default authentication mode exit line local ip no local ip no password no peer ip no username password peer ip ppp show show history terminal terminal network tunnel username write query port (config-query_port) level commands clear counters clrscrn exit no clear counters show show history state disable 5: Commands and Levels Sets the user name for PPP authentication. Stores the current configuration in permanent memory. Sets authentication to Challenge-Handshake Authentication Protocol (CHAP). Sets authentication to MS-CHAP version 1. Sets authentication to MS-CHAP version 2. Removes PPP authentication. Sets authentication to Password Authentication Protocol (PAP). Clears the screen. Removes PPP authentication. Exits to the configuration level. Enters the line level. = number of the line (serial port) to be configured. Sets the Local IP address and network mask. Formats accepted: 192.168.1.1 (default mask) 192.168.1.1/24 (CIDR) "192.168.1.1 255.255.255.0" (explicit mask) Removes the Local IP address. Removes the PPP authentication password. Removes the peer IP address. Removes the PPP authentication username. Sets the password for PPP authentication. Sets the IP Address assigned to the peer when requested during negotiation. IP address of the peer device. Enters the serial line PPP level. Displays the current configuration. Displays the last 20 commands entered during the current CLI session. Enters the configure-terminal level. = number of the terminal line (serial port) to be configured. Enters the configure-terminal level for the network. Enters the tunnel level. = number of the tunnel line (serial port) to be configured. Sets the user name for PPP authentication. Stores the current configuration in permanent memory. Zeros Query Port counters Clears the screen. Returns to the config level. Unzeros Query Port counters Displays statistics and information about the query port. Displays the last 20 commands entered during the current CLI session. Disables response to 77FE requests. XPort AR Command Reference 91