Lantronix XPort Direct XPort Direct+ - User Guide - Page 29
Apply Settings, Connect Protocol, Datagram Mode, Endpoint Configuration
View all Lantronix XPort Direct manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
4: Configuration Using Web Manager 2. In the available fields, enter or modify the following information: Figure 4-8. UDP Connection Settings Connect Protocol Protocol Select UDP from the drop-down menu. Datagram Mode Datagram Type Accept Incoming Configures the remote IP or network broadcast address and the remote port. Enter 01 for directed or broadcast UDP. The default setting is 00. Select Yes to accept incoming UDP datagrams. Endpoint Configuration Local Port Remote Port Remote Host Use Broadcast Device Address Table Enter the local port number. Enter the port number of the remote device. Enter the IP address of the remote device. Select to broadcast the UDP datagram. The default is not to broadcast. Note: Datagrams are sent as subnet-directed broadcasts. The table is enabled when Datagram Type is set to FD. Enter values between 1 and 255 to identify units on the local network of device servers. Note: Lantronix Tech Support supports Datagram type 01. Datagram Type FD is for OEM use. 3. When you are finished, click the OK button. 4. On the main menu, click Apply Settings. XPort Direct+ User Guide 29