Lantronix XPort XPort - Data Sheet - Page 1

XPort™ Data Sheet General Description The XPort™ is the most compact, integrated solution available to web-enable any device with a serial interface. By simply adding XPort™ to a product design, device manufacturers cut their design cycle by as much as 80% and are able to offer Ethernet connectivity in record time. The XPort offers the highest level of integration available in a device server. Within a compact RJ45 package is a DSTni-EX 186 controller, memory, 10/100 Ethernet transceiver, high-speed serial port, status/diagnostic LEDs, and 3 programmable I/O pins. In the space that is normally consumed by a connector, the XPort provides a complete networking interface. To enable access to a local network or the Internet, the XPort integrates a fully developed TCP/IP network stack and OS. The XPort also includes an embedded web server used to remotely configure, monitor, or troubleshoot the attached device. Where there's a need for custom user interfaces and a desire to use common and familiar tools, the XPort can serve web pages to a web browser. The XPort becomes a conduit between you and your device over the network or Internet. The Windows™-based configuration software, DeviceInstaller, simplifies installation and setup. The XPort can also be set up locally through its serial port, or remotely over a network using Telnet or a web browser. Flash memory provides for maintenance-free nonvolatile storage of web pages, and allows future system software upgrades. Using our highly integrated hardware and software platform, you will add profit to your bottom line by significantly reducing product development time, risk, and cost. Key Features • The only complete, integrated solution in an RJ45 form factor • Complete integrated solution • Embedded web server • 10/100Mbit Ethernet - Auto-Sensing • Stable, field proven TCP/IP protocol suite and web- based application framework • Easy configuration through a web interface • Easy customization of HTML web pages and configuration screens • Interactive web pages through the use of Java applets • E-mail • 128-, 192-, or 256-bit AES Rijndael encryption (Optional) • EMI tested and compliant • Extended operating temperature: -40 to +85˚ C normal mode -40 to +75˚ C high-performance mode • High-performance processor (12 MIPS at 48 MHz, 22 MIPS at 88 MHz) • Network overhead handled by XPort • Password protection • Upgrade XPort's firmware over the network • 3.3V power • Serial-to-10/100 Ethernet conversion • 921,600 baud serial speed XPort Data Sheet 910-815G 2/2013 Copyright© 2013, Lantronix. All rights reserved.