Lantronix XPort XPort-485 - Data Sheet - Page 4
XPort-485 Technical Data - firmware upgrade
View all Lantronix XPort manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
XPort-485 Technical Data Category CPU, Memory Firmware Reset Circuit Serial Interface Serial Line Formats Modem Control Flow Control Programmable I/O Network Interface Compatibility Protocols Supported LEDs Management Security Internal Web Server Weight Material Temperature Relative Humidity Shock/Vibration Warranty Included Software EMI Compliance Description Lantronix DSTni-EX 186 CPU, 256 KB zero wait state SRAM 512 KB Flash, 16 KB Boot ROM Upgradeable via TFTP and serial port Internal 200ms power-up reset pulse. Power-drop reset triggered at 2.6V. External reset input causes an internal 200ms reset. CMOS (Asynchronous) 3.3V-level signals RS-422 4-wire and RS-485 2-wire support (RS-422/485 transceivers not included) Rate is software selectable (300 bps to 921600 bps) 7 or 8 data bits, 1-2 Stop bits, Parity: odd, even, none DTR/DCD, CTS, RTS XON/XOFF (software), CTS/RTS (hardware), none 3 PIO pins (software selectable) sink or source 4mA max. RJ45 Ethernet 10BASE-T or 100BASE-TX (auto-sensing) Ethernet: Version 2.0/IEEE 802.3 ARP, UDP/IP, TCP/IP, Telnet, ICMP, SNMP, DHCP, BOOTP, TFTP, Auto IP, and HTTP 10BASE-T & 100BASE-TX Link Activity, Full/half duplex. Sofware generated status & diagnostic signals can optionally drive external LEDs through CP1 & CP3 (see Int. Guide). Internal web server, SNMP, Serial login, Telnet login Password protection, locking features, optional Rijndael 128-, 192-, or 256-bit encryption Serves web pages Storage capacity: 384 KB 9.6 grams (0.34 oz) Metal shell, thermoplastic case Operating range: -40°C to +85°C (-40°F to 185°F) normal mode -40°C to +75°C (-40°F to 167°F) high-performance mode Storage range: -40°C to +85°C (-40°F to 185°F) Operating: 5% to 95% non-condensing Non-operational shock: 500 g's, Non-operational vibration: 20 g's 2-year limited warranty Windows™ 98/NT/2000/XP-based DeviceInstaller configuration software and Windows™based Comm Port Redirector Radiated & conducted emissions - complies with Class B limits of EN 55022:1998 Direct & Indirect ESD - complies with EN55024:1998 RF Electromagnetic Field Immunity - complies with EN55024:1998 Electrical Fast Transient/Burst Immunity - complies with EN55024:1998 Power Frequency Magnetic Field Immunity - complies with EN55024:1998 RF Common Mode Conducted Susceptibility - complies with EN55024:1998 DC Characteristics for Serial, PIO, and Power Interface Symbol Vcc VIL VIH VOL VOH II ICC ICC ICC ICC lCC Parameter Supply voltage (typical 3.3) (+/-5%) Low Level Input Voltage High Level Input Voltage Low Level Output Voltage High Level Output Voltage Input Leakage Current Supply Current (idle)@ 48 MHz Supply Current (10BASE-T activity)@ 48 MHz Supply Current (10BASE-T activity)@ 88 MHz Supply Current (100BASE-T activity)@ 48 MHz Supply Current (100BASE-T activity)@ 88 MHz Min Nominal 3.14 3.3 0 2.0 2.4 119 224 267 190 233 Max 3.46 0.8 5.5 0.4 1 Units V V V V V µA mA mA mA mA mA With the purchase of XPort-485, the OEM agrees to an OEM firmware license agreement that grants the OEM a nonexclusive, royalty-free firmware license to use and distribute the binary firmware image provided, only to the extent necessary to use the XPort-485 hardware XPort-485 Data Sheet Page 4 of 5