Lantronix XPress-DRWireless XPress-DR+ - User Guide - Page 52
Channel 1, Port Settings
View all Lantronix XPress-DRWireless manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Chapter 6: Configuration Using Web Manager Figure 6-5. Channel Serial Settings 2. In the available fields, enter the following information: Channel 1 Disable Serial Port Port Settings Protocol Flow Control Baud Rate Data Bits Parity Stop Bits When selected, disables communication through the serial port. The serial port is enabled by default. From the drop-down menu, select the protocol type for the selected channel. The default setting is RS232. Note: Configuring RS-485 is not permitted. Flow control manages data flow between devices in a network to ensure the data is processed efficiently. Too much data arriving before a device is prepared to manage it causes lost or retransmitted data. None is the default setting. The unit and attached serial device, such as a modem, must agree on a speed or baud rate to use for the serial connection. Valid baud rates are 300, 600, 1200, 2400, 4800, 9600 (default), 19200, 38400, 57600, 115200, or 230400. Indicates the number of bits in a transmitted data package. The default setting is 8. Checks for the parity bit. The default setting is None. The stop bit follows the data and parity bits in serial communication. It indicates the end of transmission. The default setting is 1. XPress DR+ User Guide 52