Lantronix XPress-DRWireless XPress-DR+ - User Guide - Page 65
Exiting Setup Mode
View all Lantronix XPress-DRWireless manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Chapter 7: Configuration Using Telnet or Serial Port (Setup Mode) At this point, the screen display is the same as when you use a Telnet connection. To continue, go to step 3 in Telnet Connection above. Exiting Setup Mode To exit setup mode: You have two options: To save all changes and reboot the device, select option 9 Save and exit from the Change Setup menu. All values are stored in nonvolatile memory. To exit the configuration mode without saving any changes or rebooting. Select option 8 Exit without save from the Change Setup menu. XPress DR+ User Guide 65
Chapter 7: Configuration Using Telnet or Serial Port (Setup Mode)
XPress DR+ User Guide
65
At this point, the screen display is the same as when you use a Telnet connection. To
continue, go to
step 3 in
Telnet Connection
above.
Exiting Setup Mode
To exit setup mode:
You have two options:
To save all changes and reboot the device, select option
9
Save and exit
from the
Change Setup menu. All values are stored in nonvolatile memory.
To exit the configuration mode without saving any changes or rebooting. Select
option
8 Exit without save
from the Change Setup menu.