Lantronix xPico 200 Evaluation Kit xPico 200r Certification Firmware Instructi - Page 8
xp200-cmd_teraterm, wifi.bat, xP200-cmd_teraterm, ttermpro.exe
View all Lantronix xPico 200 Evaluation Kit manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
d. xp200-cmd_teraterm - wifi.bat - the batch file that launches Tera Term and executes the macro. 3. Copy the xPico200_MFG_Test directory to the C:\ drive of your PC. Note: If you copy it to another directory on your PC, you may need to modify the load scripts to point to a different directory. 4. Install Tera Term on your PC. These instructions were tested with Tera Term 4.73 but may work with other versions. Note: The xP200-cmd_teraterm - wifi.bat file contains a link to ttermpro.exe, the Tera Term executable. You may need to modify this link if the executable is in a different directory on your PC. 5. Connect the serial port of the module to your PC. 6. Double click the xP200-cmd_teraterm - wifi.bat file in the xPico200_MFG_Test directory. 7. In the Comport Number window that opens, enter the COM port that's connected to the xPico 200 module and click OK. 8. Click OK to start. xPico® 200 Certification Firmware Instructions 8