Lantronix xPico 270 80211ac Wi-Fi Bluetooth Embedded IoT Gateway xPico 200r Ce - Page 5
Overview, Requirements for Leveraging Lantronix xPico 200 Certificates, xPico
View all Lantronix xPico 270 80211ac Wi-Fi Bluetooth Embedded IoT Gateway manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Overview This document provides instructions on how to leverage Lantronix® xPico® certificates. In many cases, the Lantronix modular transmitter certification can be leveraged without acquiring full recertification effort in products which use the Lantronix module. The xPico 200 series has modular approval for FCC, IC, EU, Japan, China and Australia/New Zealand. All xPico certificates can be found in the xPico 200 module documentation at https://www.lantronix.com/products/xpico-200/#docs-downloads/. It is recommended that you consult with your certification laboratory to develop your certification plan for your product that includes the xPico 200 series module. The xPico 200 series module certification tests were completed at Bureau Veritas in Hsinchu, Taiwan. Requirements for Leveraging Lantronix xPico 200 Certificates To leverage Lantronix modular transmitter certifications, the following are required: ♦ Following the antenna and layout instructions in the xPico 200 Series Integration Guide. ♦ Using antennas of similar type and equal or less gain than the antennas listed in the xPico 200 Series Integration Guide. ♦ Positioning the xPico 200 module at least 20 cm from a human body and the transmitting antennas at least 20 cm from another transmitter. Lantronix has not completed SAR testing on the xPico 200 module. ♦ Running EMC tests including the FCC 15-part B and EN 301 489 -1/-17. When leveraging the modular certification, the transmitter and receiver-specific tests normally do not need to be done. ♦ Placing certifications for the xPico 200 transmitter IDs for various regions on the endproduct label according to conditions listed in the Compliance section of the xPico 200 Series Data Sheet. See https://www.lantronix.com/products/xpico-200/#docsdownloads. ♦ Running two certification testing modes. See Certification Test Modes. Disqualifications to Leveraging of Lantronix xPico 200 Certificates The following conditions disqualify the leveraging of Lantronix xPico 200 certifications: ♦ Using a different type of antenna than shown in the xPico 200 Series Integration Guide. ♦ Using an antenna with higher gain than the antennas called out in the xPico 200 Series Integration Guide. ♦ Installing the xPico 200 module antenna in a location where it is expected to be less than 20 cm from a human body. Under this scenario, SAR testing would need to be completed. ♦ Installing the xPico 200 module antenna within 20 cm of another transmitter module. ♦ Installing the xPico 200 module in a country or region not referenced in the Compliance section of the xPico 200 Series Data Sheet. See https://www.lantronix.com/products/xpico-200/#docs-downloads. xPico® 200 Certification Firmware Instructions 5