Lantronix xPico xPico - User Guide - Page 16
Using DeviceInstaller, xPico User Guide, IP Address was Obtained
View all Lantronix xPico manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
3: Using DeviceInstaller DHCP Device Name Group Comments Device Family Type ID Hardware Address Firmware Version Extended Firmware Version Online Status IP Address IP Address was Obtained Subnet Mask Gateway Number of COB partitions supported Number of Ports TCP Keepalive Non-configurable field. Displays the name associated with xPico's current IP address, if the IP address was obtained dynamically. To change the DHCP device name, see Configuration Using Web Manager or Configuration via Telnet or Serial Port (Setup Mode). Configurable field. A group name to categorize the xPico. Double-click the field, type in the value, and press Enter to complete. This group name is not visible on other PCs or laptops using DeviceInstaller. Configurable field. Information about the xPico. Double-click the field, type in the value, and press Enter to complete. This description or comment is not visible on other PCs or laptops using DeviceInstaller. Non-configurable field. Displays the xPico's device family as xPico. Non-configurable field. Displays the device type as xPico. Non-configurable field. Displays the xPico's ID embedded within the unit. Non-configurable field. Displays the xPico's hardware (or MAC) address. Non-configurable field. Displays the firmware currently installed on the xPico. Non-configurable field. Displays the full version nomenclature of the firmware. Non-configurable field. Displays the xPico's status as online, offline, unreachable (the xPico is on a different subnet), or busy (the xPico is currently performing a task). Non-configurable field. Displays the xPico's current IP address. To change the IP address, see Assigning an IP Address on page 14. Displays "Dynamically" if the xPico automatically received an IP address (e.g., from DHCP). Displays "Statically" if the IP address was configured manually. If the IP address was assigned dynamically, the following fields appear: Obtain via DHCP with value of True or False. Obtain via BOOTP with value of True or False. Obtain via RARP with value of True or False Obtain via Auto IP with value of True or False Non-configurable field. Displays the xPico's current subnet mask. To change the subnet mask, see Assigning an IP Address on page 14. Non-configurable field. Displays the xPico's current gateway. To change the gateway, see Assigning an IP Address on page 14. Non-configurable field. Displays the number of COB partitions supported. Non-configurable field. Displays the number of ports on the xPico. Non-configurable field. Displays 1-65s, the xPico's TCP keepalive value. The default setting is 45. xPico User Guide 16