Lenovo 06793JU User Manual - Page 52
Fan assembly and Heat Sink assembly
View all Lenovo 06793JU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Lenovo G560 Hardware Maintenance Manual 1070 Fan assembly and Heat Sink assembly For access, remove these FRUs in order: • "1010 Battery pack" on page 41 • "1030 Hard disk drive (HDD)/Memory/CPU (Central processing unit)/Mini PCI ExpressCard slot compartment cover " on page 43 Figure 7. Removal steps of fan assembly and heat sink assembly Note: Remove three screws 1 and four spring screws 2. Unplug the connector in the direction shown by arrow 3. 1 1 2 2 3 2 2 1 When installing: Make sure that the fan connector is attached firmly to the system board. Step 1 2 Screw (quantity) M2.5 × 4 mm, flat-head, nylon-coated (3) Color Black M2.0 × 3.2 mm, with spring, nylon-coated (4) Silver Torque 0.6 Nm (6 kgfcm) 2.0~2.5 Nm (2.0~2.5 kgfcm) 48
48
Lenovo G560 Hardware Maintenance Manual
1070 Fan assembly and Heat Sink assembly
For access, remove these FRUs in order:
• “1010 Battery pack” on page 41
• “1030 Hard disk drive (HDD)/Memory/CPU (Central processing unit)/Mini
PCI ExpressCard slot compartment cover ” on page 43
Figure 7. Removal steps of fan assembly and heat sink assembly
Note:
Remove three screws
1
and four spring screws
2
.
Unplug the connector in the direction shown by arrow
3
.
3
2
2
2
2
1
1
1
When installing:
Make sure that the fan connector is attached
fi
rmly to the
system board.
Step
Screw (quantity)
Color
Torque
1
M2.5 × 4 mm,
fl
at-head, nylon-coated (3)
Black
0.6 Nm
(6 kgfcm)
2
M2.0 × 3.2 mm, with spring, nylon-coated (4)
Silver
2.0~2.5 Nm
(2.0~2.5 kgfcm)