Lenovo 7359 User Guide - Page 29
Replacing, microprocessor
UPC - 884343941615
View all Lenovo 7359 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Replacing the microprocessor Attention Do not open your computer or attempt any repair before reading and understanding the "Important safety information" in the ThinkCentre Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to: http://www.lenovo.com/support This section provides instructions on how to replace the microprocessor. CAUTION: The heat sink and microprocessor might be very hot. Turn off the computer and wait three to five minutes to let the computer cool before opening the computer cover. To replace the microprocessor: 1. Open the computer cover. See "Opening the computer cover" on page 12. 2. Remove any parts or cables that may prevent your access to the system board. 3. Remove the heat sink. See "Replacing the heat sink" on page 19. 4. Place the heat sink on its side so that the thermal grease does not come in contact with anything. 5. Lift the small handle 3 and open the retainer 1 to access the microprocessor 2 . Figure 17. Accessing the microprocessor Chapter 2. Installing options and replacing hardware 21