Lenovo 7359 User Guide - Page 30

installing

Get Lenovo 7359 - ThinkCentre M58 - 2 GB RAM PDF manuals and user guides
UPC - 884343941615
View all Lenovo 7359 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

6. Lift the microprocessor straight up and out of the socket. Notes: a. Your microprocessor and socket might look different from the one illustrated. b. Note the orientation of the microprocessor in the socket. You can either look for the small triangle 1 on one corner of the microprocessor or note the orientation of the notches 2 on the microprocessor. This is important when installing the new microprocessor on the system board. c. Touch only the sides of the microprocessor. Do not touch the gold contacts on the bottom. d. Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must be kept as clean as possible. Figure 18. Removing the microprocessor 7. Make sure that the small handle is in the raised position and the microprocessor retainer is fully open. 22 User Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
6.
Lift
the
microprocessor
straight
up
and
out
of
the
socket.
Notes:
a.
Your
microprocessor
and
socket
might
look
different
from
the
one
illustrated.
b.
Note
the
orientation
of
the
microprocessor
in
the
socket.
You
can
either
look
for
the
small
triangle
±1²
on
one
corner
of
the
microprocessor
or
note
the
orientation
of
the
notches
±2²
on
the
microprocessor.
This
is
important
when
installing
the
new
microprocessor
on
the
system
board.
c.
Touch
only
the
sides
of
the
microprocessor.
Do
not
touch
the
gold
contacts
on
the
bottom.
d.
Do
not
drop
anything
onto
the
microprocessor
socket
while
it
is
exposed.
The
socket
pins
must
be
kept
as
clean
as
possible.
7.
Make
sure
that
the
small
handle
is
in
the
raised
position
and
the
microprocessor
retainer
is
fully
open.
Figure
18.
Removing
the
microprocessor
22
User
Guide